Out O Space Self Storage
You are here: Home > Products > Benefits

Products

Benefits

Model Selection:
When selecting a Demister pad for a desired application it is important to understand the selection process and what type of pad will be most suitable for a particular application. The selection of a demister pad should be based on factors such as its operating pressure, temperature, size and chemical properties. Each of these characteristics gives different levels of performance to the end user and should be carefully considered when selecting a Demister pad.

Installation:
The correct installation of a demister pad is crucial in achieving the necessary performance levels. The pad should be installed in a manner which allows for efficient flow of the liquid through the pad and effective separation of liquids and gases. It is important that the pad is installed close to the outlet of the equipment, so as to ensure that the pad does not become saturated and reduce its functionality.

Construction and Maintenance:
The construction of a Demister pad is a critical factor in its performance. The type of material used for its construction plays a large role in its overall performance. Common materials for Demister pads include stainless steel wire, perforated and expanded metal and other specialist material. The type of material selected should be chosen based on factors such as cost, compatibility with the operating environment and end user's requirements.

The maintenance of a Demister pad is also very important as this affects the performance and life of the pad. It is important to note that the pad should be regularly inspected and replaced if any problems are found. The inspection should be done to ensure that there are no damages caused due to corrosion, wear or tear. Additionally, the proper cleaning and lubrication of the pad should be carried out on a regular basis.

Cost:
The cost of a Demister pad is dependent upon the material used, size and the number of pads required. Generally, a Demister pad can range from a few hundred dollars to several thousand dollars depending on the material used and size of the pad. Generally, the cost of installation and maintenance is lower when compared to other filter elements.

Glycol Absorber:
A Glycol Absorber is a device which is used to absorb natural gas condensates and glycols from the outlet of a separator or scrubber. These absorbers use molecular sieves which allow for the absorption of the condensates and glycols without disrupting the normal flow of gases and vapours. The absorption of the condensates and glycols is achieved by using a liquid which is passed over the sieves. The liquid absorbs the condensates and glycols allowing them to be discharged away from the separator or scrubber outlet.

Conclusion:
Demister pads are an essential element in any Vacuum Tower, Separator, Scrubber, Gas Separator Vessel, and gasoline plant. When selecting and installing a Demister pad, it is important to consider all of the various aspects such as cost, performance, installation, construction and maintenance. Additionally, when dealing with gasoline plants, it is important to use a Glycol Absorber to prevent contamination of the gas stream. By considering the above factors, you will ensure that you get the best performance from your Demister Pad.

1. Simple structure with light weight.

2. Less pressure drop and big surface.

3. High demisting efficiency.

4. It is convenient for installation, operation and maintenance.

5. Long service life.







Add: 81 New Development Zone, Dezhou, China Email: info@demisterpad.net www.demisterpad.net
Yingdu Demister Pads Co.