You are here: Home > Products > Demister Pad > Knitted Wire Mesh Demister Pads

Wire Mesh Pad Demisters

Wire Mesh Demister Pads are used to filter and separate liquids and solids. They are made from knitted mesh fabric and have a wide variety of applications in the oil and gas industry, chemical industry, food processing industry and more.

The knitted mesh structure and structure of the Demister Pad allows the it to have a high efficiency, low resistance and very good filtration performance. The mesh size, porosity and thickness can be customized according to the customer's requirements. The Demister Pad is also corrosion resistant and has a long life span.

The product specifications of Knitted Mesh Demister Pads typically include length, width, thickness and mesh size. The pad can be made from various materials such as stainless steel, carbon steel, aluminum, and plastic. The sizes range from 0.4mm to 3.0mm in thickness, depending on the application.

Knitted Mesh Demister Pads are widely used in oil and gas industry for separation and recovery of entrapped droplets and dust particles from gas streams. They are also commonly used in chemical and pharmaceutical industries for cryogenic air separation, distillation columns and other processes. In the food and beverage industry, demister pads are used to separate and remove small solid particles from liquid products.

In terms of installation and maintenance, Knitted Mesh Demister Pads need to be properly assembled and installed with support structures. They should be inspected regularly and all worn out or damaged parts must be replaced immediately. Proper maintenance and cleaning are also essential in order to ensure the paddings work efficiently and last longer.

To sum up, Knitted Mesh Demister Pads are highly adaptable, reliable and efficient filtration devices that can be used in a variety of applications. They are available in various sizes and materials, making them an ideal choice for many industries. With proper care and maintenance, these demister pads can serve their purpose for a very long time.

 

Popular materials for wire mesh demister pads include stainless steel, copper, galvanized steel, MONEL and other materials

Demister pads are filter pads made from woven / knitted wire mesh, used for removing water and oil droplets suspended in air or other gases. Wire mesh demister pads offer an efficient solution for efficiently separating gas or liquid particles from process streams. The material to be used depends on the application.

Industries Served: Wire mesh demisters are utilized for separating liquids and vapours in petrochemical, oil and gas processing, waste treatment, power generation, and pharmaceutical process plants, also other industries.

Major materials as below:
1. SUS304, 304L, SUS316, 316L, MONEL´╝îCopper and Galvanized materials.
2. P.P (POLY PROPYLENE), P.E (POLY ETHYLENE), TEFLON
3.GLASS FIBER

The length and width of the mesh can vary and are determined by the size of the vessel, the type of application, and the desired pressure drop.

The surface treatment of the wire mesh demister depends on the application, with some treated with corrosion inhibitors, solvents, or oils. Installation of the demister can be done either directly in the vessel or externally using frames or baskets.

The main differences between stainless steel, monel, copper, and galvanized wire mesh demisters are their mechanical strength, corrosion resistance, weight, and cost.

Stainless steel is the most common material used for demisters due to its high durability and resistance to corrosion. Monel is also highly corrosion resistant and is able to withstand extreme temperatures and pressures. Copper is lighter and more conductive than both stainless and Monel, making it ideal for electrical applications. Galvanized materials are much cheaper than the other three and offer good corrosion resistance, however they lack the same level of strength and durability.

Features of Wire Mesh Demister:
1. Simple structure with light weight.
2. Less pressure drop and big surface.
3. High demisting efficiency.
4. It is convenient for installation, operation and maintenance.
5. Long service life.

 

Demister pad comes in the following kinds to meet user requirement:
Stainless steel demister pad, galvanized demister pad, copper demister pad, Titanium demister pad, Alloy demister pad.

 

Main Mesh Pad Type Demisters:

1. Stainless steel mesh type pad demister: This is a wire mesh pad demister made from stainless steel wire mesh for use in large-scale liquid and vapor separation systems.
2. Polyester mesh pad demister: This is a woven polyester mesh pad demister, often used in scrubbers and other vapor-liquid separator units.
3. Stainless steel tube pad demister: This is a cylindrical demister made from stainless steel, commonly used in gas turbine inlet systems.
4. Aluminum honeycomb pad demister: This is a lightweight, aluminum honeycomb pad demister that provides highly efficient removal of liquids and vapors.
5. Monel mesh pad demister: This is a corrosion-resistant monel mesh pad demister, ideal for high temperature applications.
6. Bronze mesh pad demister: This is a bronze mesh pad demister, designed for use in evacuation systems.
7. Glass-fiber mesh pad demister: This is a glass-fiber mesh pad demister, intended for use in small tanks, coolers and separators.
8. Nickel-alloy mesh pad demister: This is a nickel-alloy mesh pad demister, suitable for corrosive environments.
9. Titanium wire mesh pad demister: This is a titanium wire mesh pad demister, designed for higher temperature applications.
10. Polypropylene mesh pad demister: This is a lightweight, low-cost polypropylene mesh pad demister, commonly used in gas turbine inlet systems.

 

 

Materials: Stainless steel wire, copper wire, galv. wire, MONEL wire

Yingdu customized specifications

1) Demister knitted mesh
corrugated wire
0.280mm wire dia. supply as rectangular pad
2000 mm X 500 mm X 100 mm.
with density 150 KG / M3
material: austenitic stainless steel ASTM A 478 type 316.

2) Deck seal demister
Demister knitted polypropylene for deck water seal 0300
CAP.5000 M3/HR.Inert gas systems.

3) Knitted mesh type demister pad

Mesh material: SS316L,
Support material: SS 316L flat, Bar, 3mmX6mm rod
Vessel type: Ver
Manhole size: 20" NB
Mesh Density(kg/m3): 144
No-off Sections: 5 equally

Dimensions(MM)
a-1500
b-1450
h1-200
h2-150